Guide · Fort Myers, FL
New pool finish start-up: the first 30 days
Updated November 2026
The start-up period is short but it matters. Here’s what to expect so the finish you paid for looks right for years.
Short answer
For the first few weeks, brush the whole pool daily, keep the water balanced exactly as your crew instructs, run the filter continuously at first, and hold off on salt, heaters, cleaners and pool toys until you’re told it’s okay. Cement-based finishes like plaster and quartz are still curing early on, and start-up mistakes are a common cause of staining and etching.
Days 1–7
- Brush the entire surface at least daily to remove plaster dust.
- Run the pump continuously unless told otherwise.
- Follow the start-up chemistry plan exactly; don’t add chemicals on your own.
- No automatic cleaners, ladders dragged in, or toys yet.
Weeks 2–4
- Keep testing regularly and keep pH, alkalinity and calcium in range.
- Add salt and turn on heaters only when your crew says so.
- Watch for scale or stains and call early if you see any.
Want a real number for your pool resurfacing project? We call back within one business day, usually sooner.
Call (239) 788-2097Leave a message with your name, number and project. We call back within one business day.
Mistakes to avoid
- Adding salt or shocking too early
- Letting pH drift for days
- Skipping brushing
- Filling from untreated well water high in metals without telling us
Questions
Why is my new pool cloudy?
Plaster dust is normal at first. Brushing and filtration clear it. If it doesn’t clear, test the water and call us.
When can I add salt to a resurfaced pool?
Usually after the initial start-up period, often several weeks. Your crew will give a date for your finish.