Local to Fort Myers & Lee CountyCall (239) 788-2097
FORT MYERSPOOL RENEWAL

Guide · Fort Myers, FL

7 signs your pool needs resurfacing

Updated November 2026

Pool finishes wear slowly, so it’s easy to get used to the rough patches. Here’s what to look for, and what each sign usually means.

Short answer

The clearest signs are a rough surface that snags swimsuits or scrapes feet, stains that won’t come out with brushing or treatment, peeling or flaking patches, hollow-sounding spots, visible gray shell showing through, and water chemistry that’s hard to keep balanced. One or two small spots may be repairable. Widespread wear usually means it’s time to resurface.

The signs

  1. Rough texture. Etched plaster feels like sandpaper on feet and catches swimsuits.
  2. Stains that won’t lift. Metal, organic or mineral stains that return after treatment are often in the surface itself.
  3. Peeling or flaking. Delamination means the finish is separating from the layer below.
  4. Hollow spots. Tap the walls and floor where you can reach; a hollow sound means the bond has failed.
  5. Gray shell showing. Thin spots on steps and benches where the finish has worn through.
  6. Cracks. Fine surface crazing is cosmetic; wider cracks need a closer look before resurfacing.
  7. Chemistry fights. Etched finishes can make balancing water harder and give algae more places to hold on.

Repair or resurface?

A few small chips or a single stain can sometimes be patched or treated. When wear covers large areas, patching tends to show and fail. The finish choice matters too: see quartz and pebble finishes and replastering.

Want a real number for your pool resurfacing project? We call back within one business day, usually sooner.

Call (239) 788-2097Leave a message with your name, number and project. We call back within one business day.

What happens on a free visit

We look at the surface, tap for hollow spots, check tile and coping, and ask about your equipment and whether you run salt. You get options in writing, from basic white plaster to pebble, with what each will cost and how long it typically lasts.

Questions

Can I drain my pool to check the surface?

Please don’t. In Southwest Florida, high groundwater can damage an empty pool. Draining should be handled by an experienced crew as part of the job.

Is acid washing an alternative to resurfacing?

An acid wash removes a thin layer to brighten stained plaster, but it also thins the finish. It’s a short-term fix for an aging surface. See our acid wash guide.

Ready to get your pool resurfacing project priced?

Share your project details and request a free, no-obligation estimate in Fort Myers.

Call (239) 788-2097Leave a message with your name, number and project. We call back within one business day.